Sequatchie Water Works
Community water system in Sequatchie, Marion County, Tennessee, serving 547 people from groundwater under influence of surface water. 2 rules violated in the past three years, 2 still unresolved. Privately owned.
Currently in violation
EPA data updated Oct 7, 2026
Surface Water Treatment Rule
Treatment Technique Violation
Health-based
3 violations, Jan 1994 to open
Surface Water Treatment Rule
Treatment Technique Violation Health-based3 violations, Jan 1994 to open
Treatment Technique Violation, health-based: 3 violations, open since Jan 1994. The system did not carry out a required treatment process or corrective action.
What the rule requires: All systems using surface water (rivers, lakes, reservoirs) or groundwater under surface influence (GWUDI) must filter and disinfect. Treatment technique violations mean the system failed to maintain adequate disinfectant residual, exceeded turbidity limits, or lacked required permits. Snowmelt and storm events can raise turbidity and pathogen loads in surface water.
Health effects: Without proper filtration/disinfection: Giardia lamblia (severe diarrhea, cramping), Cryptosporidium (life-threatening for immunocompromised individuals), viruses (hepatitis A, norovirus). Turbidity itself is not a health risk but can shield pathogens from disinfection. Limit: Treatment technique: turbidity ≤0.3 NTU in 95% of monthly samples; detectable disinfectant residual in 95% of distribution samples
About this rule
Lead and Copper Rule
Monitoring and Reporting
4 violations, Jul 1993 to open
Lead and Copper Rule
Monitoring and Reporting4 violations, Jul 1993 to open
Monitoring and Reporting: 4 violations, open since Jul 1993. The system did not complete required monitoring, or did not report the results on time. This does not show that a contaminant was found.
What the rule requires: The 1991 LCR uses action levels rather than MCLs: if the 90th percentile of high-risk tap samples exceeds 15 ppb lead or 1.3 mg/L copper, the system must take escalating corrective actions. Violations typically indicate failure to maintain adequate corrosion control — the treatment that keeps lead from leaching out of pipes, solder, and fixtures.
About this ruleAbout this data
Rules violated and the list above come from EPA's SDWIS violation records, one row per violation and contaminant, grouped by the rule each row belongs to. A violation counts when its non-compliance period ended on or after Jul 1, 2023, the start of the thirteen quarters ECHO's three-year figures cover, or is still open; it is unresolved when it was still open at EPA's data refresh on Oct 7, 2026. EPA's rule code 500, "Not Regulated", is left out, as in ECHO's counts. Each rule's violation count is EPA's, and one rule can carry several: a missed monitoring round for a group of contaminants is one violation per contaminant and period. Category names are EPA's violation categories.
ECHO's own summary count of rules violated agrees with this grouping for 98.8% of active systems nationally, and its count of rules being violated for 98.7%; where they differ, the figures here follow the rows listed.
A measured value shown with a rule is the sample result EPA recorded with that violation (SDWIS viol_measure), against the limit EPA recorded on the same row (state_mcl), both in EPA's unit as written; violations without a recorded value, such as missed monitoring, show none. Other measured contaminant levels are not part of this record; each system publishes them in its annual Consumer Confidence Report.
The system's location is the centre of the first town EPA lists the system as serving, from Census Bureau place files.
Source: the U.S. EPA's Enforcement and Compliance History Online system (ECHO), which publishes the federal Safe Drinking Water Information System. EPA's terms and values are shown as published. The Tennessee records are from EPA's data refresh of Oct 7, 2026; EPA refreshes this data quarterly, and states report to EPA with a lag of three to six months, so the newest violations may not appear yet.