DD Mobile Home Park

What it means: This entry tracks violations of the Maximum Residual Disinfectant Level (MRDL) for chlorine — meaning too much disinfectant residual in the distribution system, not too little. Chlorine is added to water to kill pathogens, but excess residual can react with organic matter to form disinfection byproducts.

Health effects: Acute high-dose exposure to chlorinated water can cause eye and nose irritation, stomach discomfort, and nausea. Chronic exposure above the MRDL is primarily a concern because elevated chlorine accelerates formation of trihalomethanes and haloacetic acids, which are associated with increased cancer risk over time.

Limit: MRDL: 4.0 mg/L as an annual average

What it means: The 2006 GWR requires regular sanitary surveys of groundwater systems and targeted corrective action when fecal indicators are found in source water. Systems with significant deficiencies must provide 4-log virus treatment (99.99% removal/inactivation) or fix the deficiency.

Health effects: Protects against enteric viruses, which can contaminate groundwater via cracked well casings, failing septic systems, or animal waste. Viruses persist longer in groundwater than in surface water. Hepatitis A and norovirus are the primary pathogens of concern.

Limit: Treatment technique: 4-log virus treatment required when source water has fecal indicators or significant sanitary deficiencies

What it means: The 1991 LCR uses action levels rather than MCLs: if the 90th percentile of high-risk tap samples exceeds 15 ppb lead or 1.3 mg/L copper, the system must take escalating corrective actions. Violations typically indicate failure to maintain adequate corrosion control — the treatment that keeps lead from leaching out of pipes, solder, and fixtures.

Health effects: Lead: no safe level for children. Causes irreversible neurological damage, impaired cognitive development, behavioral problems, and reduced IQ in children under 6. In adults: hypertension, cardiovascular disease, kidney damage. Copper: acute gastrointestinal distress at high levels; liver/kidney damage at very high chronic levels.

Limit: Action levels: lead 15 ppb, copper 1.3 mg/L — 90th percentile of tap samples at high-risk sites

What it means: When a system violates a drinking water standard, it must notify customers promptly: within 24 hours for acute violations (e.g., E. coli), 30 days for non-acute MCL violations, and 1 year for monitoring failures. A violation means the notification was late or missing — not that the underlying water issue is necessarily severe.

Health effects: No direct health risk from the notification violation itself, but delayed notification means customers may have consumed contaminated water without the chance to take protective action (boil water orders, bottled water use).

Limit: No MCL — compliance requires meeting specific notification deadlines

What it means: The 2013 RTCR (effective 2016) replaced the original TCR. It triggers automatic E. coli testing whenever total coliform is found. A single E. coli-positive sample is an acute MCL violation. It also requires systems exceeding 5% total coliform-positive samples to conduct a formal assessment and correct any deficiencies, helping prevent contamination before it escalates.

Health effects: Total coliform bacteria indicate that the disinfection barrier has been breached or fecal contamination is entering the system. E. coli specifically indicates fecal contamination and the possible presence of disease-causing pathogens (norovirus, Salmonella, Shigella, Campylobacter). Illness can be severe in elderly, young children, and immunocompromised individuals.

Limit: Zero E. coli; ≤5% of monthly samples total coliform-positive