Tapcensus

City of Marshall

Community water system in Harrison County, Texas, serving 23,091 people from surface water. 7 rules violated in the past three years, 3 still unresolved. Owned by local government.

People served 23,091 surface water
Rules violated, past 3 years 7 one rule can carry several violations
Unresolved 3 rules still in violation, EPA data updated Oct 7, 2026
Quarters with violations 10 of the last 12 quarters

Quarterly compliance history

VQ4
2023
VQ1
2024
VQ2
2024
–Q3
2024
–Q4
2024
VQ1
2025
VQ2
2025
VQ3
2025
VQ4
2025
VQ1
2026
VQ2
2026
VQ3
2026
UQ4
2026
–No violation identified VViolation identified SSerious violator (EPA enforcement priority) UUndetermined Oldest quarter on the left. Quarters 1 to 12 are the twelve most recently completed quarters at EPA's last data refresh; the 13th is the current quarter up to that date, which EPA reports as undetermined.

Still in violation

EPA data updated Oct 7, 2026

Consumer Confidence Rule (CCR)

Community water systems must deliver an annual water quality report (Consumer Confidence Report) to all customers by July 1, covering the previous year.

EPA rule code 7000 · Monitoring and Reporting

What it means: Community water systems must deliver an annual water quality report (Consumer Confidence Report) to all customers by July 1, covering the previous year. It must list all detected contaminants, compare them to MCLs, identify source water, and include educational language about lead. A violation means the report was not delivered on time or was incomplete.

Health effects: No direct health risk — this is an administrative transparency obligation. Failure means customers lack information to make informed decisions (e.g., whether to use bottled water for infants when lead is elevated).

Limit: No MCL — this is a reporting requirement

About this rule

Lead and Copper Rule (LCR)

The 1991 LCR uses action levels rather than MCLs: if the 90th percentile of high-risk tap samples exceeds 15 ppb lead or 1.3 mg/L copper, the system must take…

EPA rule code 5000 · Treatment Technique

What it means: The 1991 LCR uses action levels rather than MCLs: if the 90th percentile of high-risk tap samples exceeds 15 ppb lead or 1.3 mg/L copper, the system must take escalating corrective actions. Violations typically indicate failure to maintain adequate corrosion control — the treatment that keeps lead from leaching out of pipes, solder, and fixtures.

Health effects: Lead: no safe level for children. Causes irreversible neurological damage, impaired cognitive development, behavioral problems, and reduced IQ in children under 6. In adults: hypertension, cardiovascular disease, kidney damage. Copper: acute gastrointestinal distress at high levels; liver/kidney damage at very high chronic levels.

Limit: Action levels: lead 15 ppb, copper 1.3 mg/L — 90th percentile of tap samples at high-risk sites

About this rule

Lead and Copper Rule Revisions (LCRR)

The 2021 LCRR updated the 1991 LCR with mandatory lead service line inventories and replacement planning, a new 'trigger level' at 10 ppb requiring…

EPA rule code 5200 · Treatment Technique

What it means: The 2021 LCRR updated the 1991 LCR with mandatory lead service line inventories and replacement planning, a new 'trigger level' at 10 ppb requiring optimization, and strengthened public education. The 2024 Lead and Copper Rule Improvements (LCRI) further requires replacing all lead service lines within 10 years.

Health effects: Same as Lead and Copper Rule (5000). Violations typically reflect failure to complete the required lead service line inventory or submit a required replacement plan. Lead service lines are the primary source of lead at the tap in many older systems.

Limit: Lead action level: 15 ppb (trigger level: 10 ppb); copper action level: 1.3 mg/L

About this rule

Also violated in the past three years

Oct to Dec 2023 to Oct to Dec 2026

Interim Enhanced Surface Water Treatment Rule

The Interim Enhanced Surface Water Treatment Rule (IESWTR), finalized in 1998, strengthened protections for systems serving 10,000 or more people by tightening…

EPA rule code 0300 · Treatment Technique

What it means: The Interim Enhanced Surface Water Treatment Rule (IESWTR), finalized in 1998, strengthened protections for systems serving 10,000 or more people by tightening turbidity limits and requiring Cryptosporidium removal. It was an intermediate step between the original SWTR and the Long-Term Enhanced SWTRs.

Health effects: Violations indicate failure to meet treatment technique requirements that reduce exposure to Cryptosporidium, Giardia, and other microbial pathogens. Cryptosporidium poses the greatest risk to immunocompromised individuals, infants, and the elderly, and can cause severe or fatal illness in vulnerable populations.

Limit: Treatment technique — no numeric MCL; compliance means meeting turbidity limits (0.3 NTU in 95% of monthly samples) and Cryptosporidium removal benchmarks

About this rule

Revised Total Coliform Rule (RTCR)

The 2013 RTCR (effective 2016) replaced the original TCR.

EPA rule code 8000 · Microbial

What it means: The 2013 RTCR (effective 2016) replaced the original TCR. It triggers automatic E. coli testing whenever total coliform is found. A single E. coli-positive sample is an acute MCL violation. It also requires systems exceeding 5% total coliform-positive samples to conduct a formal assessment and correct any deficiencies, helping prevent contamination before it escalates.

Health effects: Total coliform bacteria indicate that the disinfection barrier has been breached or fecal contamination is entering the system. E. coli specifically indicates fecal contamination and the possible presence of disease-causing pathogens (norovirus, Salmonella, Shigella, Campylobacter). Illness can be severe in elderly, young children, and immunocompromised individuals.

Limit: Zero E. coli; ≤5% of monthly samples total coliform-positive

About this contaminant
About this data

EPA counts the rules a system was in violation of, not the individual violations; one rule can carry several in the same period. Unresolved means still in violation at EPA's latest data refresh. Measured contaminant levels are not part of this record; each system publishes them in its annual Consumer Confidence Report.

Service area from EPA's Public Water System Service Area Boundaries dataset: State Agency. The system's location is the centre of the service area EPA publishes for the system.

Source: the U.S. EPA's Enforcement and Compliance History Online system (ECHO), which publishes the federal Safe Drinking Water Information System. EPA's terms and values are shown as published. The Texas records are from EPA's data refresh of Oct 7, 2026; EPA refreshes this data quarterly, and states report to EPA with a lag of three to six months, so the newest violations may not appear yet. Retrieved from ECHO on Oct 11, 2026.